User Manual

22 23
model no. 058-8194-4 | contact us 1-800-689-9928
TROUBLESHOOTING
MAINTENANCE
The welder needs regular maintenance:
• Periodically clean dust, dirt, grease, etc. from your welder. Every six months, or as necessary,
remove the cover panel from the welder and air blow any dust and dirt that may have
accumulated inside the welder.
• Replace power cord, ground cable ground clamp, or electrode assembly when damaged or worn.
• Store in a clean dry facility, free from corrosive gas, excess dust and high humidity. Store in a
temperature range from -12 to 49ºC (10 to 120ºF) and relative humidity not more than 90%.
• When transporting or storing the welder after use, it is recommended to repack the product as it
was received for protection. Cleaning is required before storage and you must seal the plastic
bag in the box for storage.
MAINTENANCE
Welder does not
work when the main
switch is turned on.
1. No power input.
2. The power cord or power plug
is broken.
3. Main switch is broken.
4. Transformer is broken.
1. Check circuit or fuse of
power source.
2. Replace power cord.
3. Replace switch.
4. Replace the transformer.
Welder cannot
weld.
1. Incorrect power input.
2. Inadequate current at output.
3. Poor connection of output
cable.
1. Check the power source.
2. Check the welding cable
and grounding are reliably
connected to welder and
workpiece.
3. Check the output
connection.
Welder blows
fuse.
Wrong fuse in power supply. Check the
fuse in power.
1. Source should be 20 A.
Arc is hard to
start.
1. The wrong wire.
2. Base metal not grounded
reliably.
1. Use the correct one.
2. Make sure the connection
is good.
Bad wire feed.
1. There is not enough pressure.
2. Adjustor of spool holder is too
loose.
3. Wire has been oxidized.
1. Tighten the drive tension
adjustor on wire feeder.
2. Adjust the wing nut on the
spool holder.
3. Replace wire spool.
Others.
Contact us.
Problem Possible Cause Corrective Action
TROUBLESHOOTING
model no. 058-1294-8 | contact us 1-800-689-9928model no. 058-1294-8 | contact us 1-800-689-9928model no. 058-1294-8 | contact us 1-800-689-9928
Model no. 058-1926-6 | contact us 1-800-689-9928