Installation Instructions

a
)
Insert the hinge screen track into the header
screen channel. Tip the track as shown. Be certain the
long flat part of the track is facing away from the
door unit
(
fig.1 & 1a
)
.
b
)
Push the track upward maintaining the angle until the
inside leg of the track is positioned at the top-back of the
screen channel as shown
(
fig.2
).
c
) Pull the bottom of the track away from the door
unit to snap it into place
(
fig.3 & 3a
)
.
Doc #QMP-WI-040 Rev. A Date: 4/13 Owner: Quality Manager
SLIDING PATIO DOOR
SCREEN DOOR
INSTALLATION INSTRUCTIONS
REQUIRED TOOLS
Safety Glasses • Marker • Flat Screw Driver • #2 Phillips Screwdriver • Drill • 7/64" Drill Bit
NOTE:
These instructions are recommended installation methods and not a substitute for local building codes.
Please consult your local building codes prior to any door installation.
1
)
Insert the Hanging Screen Track
g. 1
g. 2g. 1a g. 3a
g. 3