Instruction manual

ASSEMBLY INSTRUCTIONS
13
5 U.S. GALLONS (18.9 L) AIR COMPRESSOR 058-9308-0
Before assembly
• Unpack the carton and take out the air compressor. Make sure all parts are present. Inspect
the unit for damage.
• If any part is missing or damaged, do not attempt to assemble the product. Contact customer
service for replacement parts.
• Complete a damage claim for replacement parts immediately as there is time limitation.
• Check the compressor’s serial label to ensure that the correct model was received, and that it
has the required pressure rating (120/150 PSI) for its intended use.
Assembly of the compressor
1. Place the compressor (1) on a flat, even,
concrete floor surface or separate
concrete foundation in a clean,
well-ventilated area
(fig A) .
Note: Make sure the compressor is placed on a
flat surface to ensure proper drainage of the
moisture in the tank.
2. Locate the compressor near a grounded
electrical outlet (2)
(fig A) .
Note: During cold weather, store the
compressor in a heated place when not in use.
This will reduce motor starting problems and
freezing of water condensation.
CAUTION!
Potential hazard that may result in moderate injury or damage to
equipment.
• To avoid damaging the motor, do not use the compressor in areas
containing dust particles.
MC-589308-03
0
5
15
18
50
10
0
25
0
75
100
125
150
175
200
225
250
0
25
0
5
10
15
20
50
75
100
125
150
175
200
225
250
2
fig A
1