Safety Data Sheets (SDS)

pneumatic powered air hoses to blow away dust. A HEPA vacuum (explosion proof) may be used. Place dust into
suitable, covered, labeled containers for disposal.
Other Information
Report large dust releases into the environment to local health, safety and environmental authorities, as required.
Dispose dust in accordance with municipal, province/state, and federal requirements.
Precautions for Safe Handling
No special handling procedures are required for the undisturbed product.
The following information is based on wood dust; avoid generating dusts.
Avoid breathing in dust and prevent skin contact (repeated or prolonged skin contact). Do not get dust in eyes. Wear
personal protective equipment to avoid direct contact with the dust.
General hygiene considerations: do NOT smoke in work areas. Do NOT eat, drink or store food in work areas. Wash
hands thoroughly after handling this product and before eating, using the washroom or leaving work area.
Conditions for Safe Storage
Store in an area that is cool and dry and separate from incompatible materials such as sources of ignition (see Section
10: Stability and Reactivity). Protect from conditions listed in Conditions to Avoid in Section 10 (Stability and Reactivity).
Follow all precautions given on this safety data sheet.
Comply with all applicable health and safety regulations, fire and building codes.
SECTION 7. HANDLING AND STORAGE
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
ACGIH® TLV® OSHA PEL
Chemical Name TWA STEL [C] TWA STEL
Control Parameters
NIOSH REL
TWA STEL
softwood, allergenic and
non-allergenic species
1.0 mg/m3 (I)
A4
15 mg/m3 1.0 mg/m3
Appropriate Engineering Controls
Individual Protection Measures
Eye/Face Protection
The OSHA PEL of 15 mg/m³ is for total dust (particulates not otherwise classified (PNOC)) and has a TWA exposure
limit of 5 mg/m³ for the respirable fraction.
Allergenic and non-allergenic softwood species have an IARC 1 notation (Carcinogenic to Humans).
All softwood dusts have an ACGIH A4 notation (Not Classifiable as a Human Carcinogen).
The product may be hazardous if disturbed to create dust (e.g. sanding, cutting). Exposure controls are recommended
based on wood dust of softwood, allergenic and non-allergenic species.
Consult local authorities for provincial or state exposure limits. ACGIH® = American Conference of Governmental
Industrial Hygienists. TLV® = Threshold Limit Value. TWA = Time-Weighted Average. STEL = Short-term Exposure
Limit. C = Ceiling limit. OSHA = US Occupational Safety and Health Administration. PEL = Permissible Exposure
Limits. I = Inhalable fraction. A4 = Not classifiable as a human carcinogen. NIOSH = National Institute for Occupational
Safety and Health. REL = Recommended Exposure Limit.
For large scale use of this product (industrial manufacturing):
Engineering methods to control hazardous conditions (dust) are preferred. Methods include mechanical ventilation
(dilution and local exhaust), process or personnel enclosure, control of process conditions, and process modification
(e.g. substitution of a less hazardous material).
Do not allow dust from the product to accumulate in the air in work or storage areas, or in confined spaces.
Exhaust dust directly to the outside through explosion proof ducting / ventilation systems, taking any necessary
precautions for environmental protection.
If engineering controls, administrative controls and work practices are not effective in controlling exposure to dust from
this product, then wear suitable personal protective equipment including approved respiratory protection.
SDS No.:
Date of Preparation:
005 Page
of
1104
June 10, 2015
Product Identifier: Westpine MDF