Safety Data Sheets (SDS)

Molecular Weight
Other Physical Property 1 Lower Explosive Limit: 40 g/m³ (wood dust)
Other Physical Property 2 Upper Explosive Limit: Variable (wood dust)
Other Physical Property 3 The autoignition temperature, LEL and UEL for wood dust vary with exact
composition, particle size, moisture level, rate of heating and dust concentration.
Chemical Stability
No information on the pure product or for the ingredient urea polymer with formaldehyde.
Based on wood dust: Normally stable. Under normal conditions of storage and use, hazardous polymerization will not
occur.
Conditions to Avoid
No information on the pure product or for the ingredient urea polymer with formaldehyde.
Based on wood dust: Generation of dust through cutting, sanding or disturbing the pure product. Open flames, sparks,
static discharge, heat and other ignition sources. May form explosive dust-air mixtures. Temperatures above 204.0 ºC
(399.2 ºF)
Incompatible Materials
No information on the pure product or for the ingredient urea polymer with formaldehyde.
Based on wood dust: Wood dust is incompatible with oxidizing materials.
Corrosivity to Metals: No information was found in the literature reviewed.
Hazardous Decomposition Products
No information on the pure product or for the ingredient urea polymer with formaldehyde (although trace amounts of
formaldehyde may be released).
Based on wood dust: Under normal conditions of storage and use, hazardous decomposition products should not be
produced.
If a fire occurs, hazardous combustion products will be emitted: carbon monoxide, carbon dioxide, soot, and toxic and
irritating fumes and gases, such as aldehydes, organic acids and polynuclear aromatic compounds.
Possibility of Hazardous Reactions
No information on the pure product or for the ingredient urea polymer with formaldehyde.
Based on wood dust: None expected under normal conditions of storage and use.
SECTION 10. STABILITY AND REACTIVITY
Reactivity
No information on the pure product or for the ingredient urea polymer with formaldehyde.
Based on wood dust: Not reactive under normal conditions of use. Wood dust is reactive with oxidizing materials.
Combustible in the presence of the following materials or conditions: open flames, sparks and static discharge.
No information is available for the pure product based on the literature reviewed. Information for the product ingredients
is presented where available.
Inhalation ATEmix = 1.28 mg/L (4-hour exposure) (dust/mist)
0% of the mixture consists of an ingredient or ingredients of unknown acute toxicity (inhalation)
Oral ATEmix = 64569.23 mg/kg
0% of the mixture consists of an ingredient or ingredients of unknown acute toxicity (oral)
SECTION 11. TOXICOLOGICAL INFORMATION
Dermal ATEmix = 16153.85 mg/kg
0% of the mixture consists of an ingredient or ingredients of unknown acute toxicity (dermal)
Acute Toxicity
The toxicity of wood products pertains to the dust created or generated by the processing or disturbance (cutting,
sanding) of the raw product.
Inhalation; skin contact; eye contact.
Likely Routes of Exposure
Chemical Name LC50 LD50 (oral) LD50 (dermal)
Urea polymer with
formaldehyde
> 167 mg/m3 (rat) (4-hour
exposure)
8,394 mg/kg (rat) > 2,100 mg/kg (rat)
SDS No.:
Date of Preparation:
004 Page
of
1206
March 10, 2016
Product Identifier: Ranger MDF