User Manual
20V max* LITHIUM-ION CORDLESS DRILL/DRIVER - 054-1332-620V max* LITHIUM-ION CORDLESS DRILL/DRIVER - 054-1332-6
11 12
Know your Lithium-Ion rechargeable battery
80-100% Charge
60-79% Charge
40-59% Charge
20-39% Charge
Under 20% Charge
Completely Discharged
Fuel gauge
This Lithium-Ion battery pack is equipped with a Fuel Gauge, which displays the remaining charge of
the battery pack. Press the Fuel Gauge button to display the LED lights. The LED lights will stay lit for
approximately 4 seconds.
NOTE:The Fuel Gauge can be used when the battery pack is attached to or removed from the tool.
Low capacity warning
If one LED on the Fuel Gauge begins to flash, the battery pack’s charge is under 20% capacity and
should be recharged.
Unlike other battery pack types, Lithium-Ion battery packs deliver fade-free power for their entire run time.
The tool will not experience a slow, gradual loss of power as you work. To signal that the battery pack is
at the end of its run time and needs to be charged, power to the tool will drop quickly. The Fuel Gauge will
begin to display four flashing LED lights when it is completely discharged. When this happens, remove the
tool from the workpiece, remove the battery pack and charge the battery pack as needed.
OPERATING INSTRUCTIONS
Know your cordless DRILL/DRIVER
1
8
6
2
3
5
7
4
No. Description No. Description
1 Keyless Chuck 5 Direction-of-Rotation Selector
2 Torque-Adjustment Ring 6 LED Charger Indicator
3 Trigger Switch 7 Bit Clip
4 Battery-Release Button 8 Charger Base
Before attempting to use this tool, become familiar with all of its operating features and safety
requirements. For optimum performance and safety, read the following operating instructions carefully
before using.
WARNING!
Do not allow familiarity with the Cordless Drill/Driver to cause a lack of alertness. A fraction
of a second of carelessness is enough to cause severe injury.
DESCRIPTION