User Manual

20V max* LITHIUM-ION CORDLESS DRILL/DRIVER - 054-1332-620V max* LITHIUM-ION CORDLESS DRILL/DRIVER - 054-1332-6
9 10
• Donotoperatethechargerwithadamagedcordorplug,which could cause shorting and
electric shock. If damaged, have the charger repaired or replaced by a qualified service technician.
• Donotoperatethechargerifithasreceivedasharpblow,beendroppedorotherwise
damagedinanyway.Take it to a qualified service technician for an electrical check to determine
if the charger is in good working order.
• Donotdisassemblethecharger.Take it to a qualified service technician when service or repair is
required. Incorrect reassembly may result in a risk of electric shock or fire.
• Unplugthechargerfromoutletbeforeattemptinganymaintenanceorcleaningtoreduce
theriskofelectricshock.
• Disconnectthechargerfromthepowersupplywhenitisnotinuse. This will reduce the risk
of electric shock or damage to the charger if metal items should fall into the opening. It will also help
prevent damage to the charger during a power surge.
• Riskofelectricshock. Do not touch the uninsulated portion of the output connector or the
uninsulated battery terminal.
• Savetheseinstructions.Refer to them frequently and use them to instruct others who may use this tool. If
you lend this tool to someone, also lend these instructions to prevent misuse of the product and possible injury.
Package contents:
CordlessDrill/Driver,BatteryPack,Charger,2double-endedbits,InstructionManual.
WARNING!
Remove the Cordless Drill/Driver from the package, and examine it carefully. Do not discard
the carton or any packaging material until all parts have been examined.
WARNING!
If any part of the Cordless Drill/Driver is missing or damaged, do not attach the battery
pack to the tool or use the tool until the part has been repaired or replaced. Failure to heed
this warning could result in serious injury.
BatteryPack Charger
054-3124-0/5162 5331
• Beforeusingthebatterycharger,read all instructions and cautionary markings in this Instruction
Manual, on the battery charger, the battery and the product using the battery to prevent misuse of
the products and possible injury or damage.
• Donotusethechargeroutdoorsorexposeittowetordampconditions. Water entering the
charger will increase the risk of electric shock.
• Useofanattachmentnotrecommendedandsoldbythebatterychargermanufacturer
mayresultinariskofre,electricshockorpersonalinjury.Following this rule will reduce
the risk of electric shock, fire or serious personal injury.
• Donotabusethecordorcharger.Never use the cord to carry the charger. Do not pull the charger
cord rather than the plug when disconnecting the plug from the receptacle. Damage to the cord or
charger could occur and create an electric shock hazard. Replace damaged cords immediately.
• Makesurethatthecordislocatedsothatitwillnotbesteppedon,trippedover,comein
contactwithsharpedgesormovingpartsorotherwisebesubjectedtodamageorstress.
This will reduce the risk of accidental falls, which could cause injury and damage to the cord, which
could result in electric shock.
• Keepthecordandchargerfromheattopreventdamagetothehousingorinternalparts.
• Donotletgasoline,oils,petroleum-basedproducts,etc.comeincontactwithplastic
parts.They contain chemicals that can damage, weaken or destroy plastic.
• Anextensioncordshouldnotbeusedunlessabsolutelynecessary.Use of an improper
extension cord could result in a risk of fire and electric shock. If an extension cord must be used,
make sure that:
• The pins on the plug of the extension cord are the same number, size and shape as the those of
the plug on the charger.
• The extension cord is properly wired and in good electrical condition.
• The wire size is large enough for the AC ampere rating of the charger as specified below:
CordLength(Feet) 25' 50' 100'
CordSize (AWG) 16 16 16
NOTE: AWG = American Wire Gauge
SAFETY GUIDELINES SAFETY GUIDELINES