User Manual

20V max* LITHIUM-ION CORDLESS DRILL/DRIVER - 054-1332-620V max* LITHIUM-ION CORDLESS DRILL/DRIVER - 054-1332-6
7 8
• Keepyourhandsawayfromthemotor-housingvents.Hot gas comes from the vents during operation.
• Releasethetriggerimmediatelywhenascrewistightenedtoavoidbreakingthescrew.
• Forbestresults,yourbatterytoolshouldbechargedinalocationwherethetemperature
ismorethat0°C(32°F)butlessthat40°C(104°F).Do not store outside orin vehicles.
• Thelabelonyourtoolmayincludethefollowingsymbols.Thesymbolsandtheir
denitionsareasfollows:
V ..................... Volts
A ..................... Amperes
Hz ................... Hertz
W .................... Watts
min ................. Minutes
............... Alternating current
............. Direct current
n
0
................... No load speed
............... Class II Construction
…/min ........... Revolutions per minute
............... Grounding terminal
BPM ............... Beats per minute
.............. WARNING – To reduce the risk of injury, user must read instruction manual.
Safety guidelines for charger
WARNING!
Read and understand all instructions. Failure to follow all instructions listed below may
result in electric shock, fire and/or serious personal injury.
WARNING!
To reduce the risk of electric shock or damage to the charger and battery, use only the
batteries and charger listed.
SAFETY GUIDELINES
• Whenbatterypackisnotinuse,keepitawayfromothermetalobjectslikepaperclips,
coins,keys,nails,screwsorothersmallmetalobjectsthatcanmakeaconnectionfrom
oneterminaltoanother.Shorting the battery terminals together may cause burns or a fire.
• Underabusiveconditions,liquidmaybeejectedfromthebattery;avoidcontact.If
contactaccidentallyoccurs,ushwithwater.Ifliquidcontactseyes,alsoseekmedical
help.Liquid ejected from the battery may cause irritation or burns.
Service
• Haveyourpowertoolservicedbyaqualiedrepairpersonusingonlyidentical
replacementparts.This will ensure that the safety of the power tool is maintained.
Safety guidelines for cordless drill/driver
• Holdpowertoolsbytheirinsulatedgrippingsurfaceswhenperforminganoperation
wherethetoolmaycontacthiddenwiringoritsowncord.Contact with a “live” wire may
make exposed metal parts of the power tool “live” and could give the operator an electric shock.
• Whenworkingwiththepowertool,alwaysholditrmlywithbothhandsandprovidefor
asecurestance.The power tool is guided more securely with both hands.
• Keepthecordandchargerfromheattopreventdamagetothehousingorinternalparts.
• Securetheworkpiece.Clamping devices or a vise are more effective than your hand for holding the
workpiece in place.
• Donotallowgasoline,oils,petroleum-basedproducts,etc.tocomeincontactwith
plasticparts.These materials contain chemicals that can damage, weaken, or destroy plastic.
• Alwayswaituntilthemachinehascometoacompletestopbeforeplacingitdown.The
tool insert can jam and lead to loss of control of the power tool.
• Beforeperforminganykindofworkonthemachine(e.g.,maintenance,toolchange,etc.)as
wellaswhentransportingandstoringit,alwayssetthedirection-of-rotationswitchtothe
centre(locked)position. Unintentional activation of the On/Off switch may result in personal injury.
• Donotopenthebattery.There is risk of a short circuit.
• Protectthebatteryfromheatandre.There is risk of explosion.
• Wearearprotectorswhenusingthedrill/driver.Exposure to noise can cause hearing loss.
• Useprotectivegloveswhenremovingthebitfromthetool,orrstallowthebittocool
down.The bit may be hot after prolonged use.
• Useprotectivegloveswhenoperatingthetool.Protective gloves can help to keep youfrom
being burnt and hurt.
SAFETY GUIDELINES