User Manual
20V max* LITHIUM-ION CORDLESS DRILL/DRIVER - 054-1332-620V max* LITHIUM-ION CORDLESS DRILL/DRIVER - 054-1332-6
21 22
Removing the battery pack and
preparation for recycling
To preserve natural resources, please recycle or dispose of the batteries
properly. This product contains Lithium-Ion batteries. Provincial or
municipal laws may prohibit disposal of Lithium-Ion batteries in ordinary
trash. Consult the local waste authority for information regarding available
recycling and/or disposal options.
WARNING!
Upon removal of the battery pack for disposal or recycling, cover the battery pack’s
terminals with heavy-duty adhesive tape. Do not attempt to destroy or disassemble the
battery pack or remove any of its components. Lithium-Ion batteries must be recycled or
disposed of properly. Never touch both terminals with metal objects and/or body parts, as
a short circuit may result. Keep away from children. Failure to comply with these warnings
could result in fire and/or serious injury.
Chuck removal (fig 10)
The chuck can be removed and replaced with a
new one.
1. Lock the trigger switch by placing the
direction-of-rotation selector in the centre
position.
2. Open the chuck jaws. Using a screwdriver,
remove the chuck screw by turning it
clockwise,
3. Insert a 5/16-in. or larger hex key into the
chuck of the drill/driver and tighten the chuck
jaws securely.
4. Tap the hex key sharply with a mallet in a
counter-clockwise direction. This will loosen the
chuck for easy removal.
5. Attach a new chuck to the spindle and tighten
the chuck screw.
General maintenance
WARNING!
To avoid personal injury, always remove the battery pack from the tool when cleaning or
performing any maintenance.
WARNING!
Do not let brake fluids, gasoline, petroleum-based products, penetrating oil, etc. come into
contact with plastic parts. These substances contain chemicals that can damage, weaken,
or destroy plastic.
The tool may be cleaned most effectively with compressed dry air. Always wear safety goggles when
cleaning tools with compressed air. Before each use:
• Inspect the cordless drill/driver, the trigger switch, and the cord for damage.
• Check for damaged, missing, or worn parts.
• Check for loose screws, misalignment or binding of moving parts, or any other condition that may
affect the operation.
• If abnormal vibration or noise occurs, turn the cordless drill/driver off immediately, and have the
problem corrected before further use.
WARNING!
When servicing, use only identical replacement parts. The use of any other parts may
create a hazard or cause damage to the product.
WARNING!
Use only accessories that are recommended for this drill/driver by the manufacturer. Accessories
that may be suitable for one tool may become hazardous when used with another tool.
WARNING!
To ensure safety and reliability, all repairs should be performed by a qualified service
technician.
MAINTENANCE
MAINTENANCE
fig 10
Mallet
Hex Wrench
Chuck Jaws