model no. 060-1550-0 CORDLESS BRUSHLESS LEAF BLOWER IMPORTANT: Read and understand this instruction manual thoroughly before using the product.
headline bars continuation tabs notes warnings
Technical Specifications 4 Safety Guidelines 5 Key Parts Diagram 10 Operating Instructions 11 Maintenance 13 Troubleshooting 14 Parts List 15 Warranty 17 NOTE: If any parts are missing or damaged, or if you have any questions, please call our toll-free helpline at 1-800-689-9928. SAVE THESE INSTRUCTIONS • This manual contains important safety and operating instructions. Read all instructions and follow them when using this product.
headline bars 4 model no. 060-1550-0 | contact us 1-800-689-9928 TECHNICAL SPECIFICATIONS Rated Voltage 20 V d.c. Maximum Air Volume 410 CFM Maximum Air Speed 100 MPH TECHNICAL SPECIFICATIONS *Maximum battery voltage without workload; with workload nominal voltage is 18 V. ® Recommend using tool with Mastercraft 20V max* Lithium-Ion 4.0 Ah battery (054-7557-6; sold continuation tabs separately) for optimal performance.
SAFETY GUIDELINES WARNING! Safety symbols in this Instruction Manual are used to flag possible dangers. The safety symbols and their explanations require your full understanding. The safety warnings do not, by themselves, eliminate any danger, nor are they substitutes for proper accident prevention measures. WARNING! KNOW YOUR TOOL To operate this tool, carefully read this Instruction Manual and all labels affixed to the cordless blower before using.
headline bars 6 model no. 060-1550-0 | contact us 1-800-689-9928 SAFETY GUIDELINES ELECTRICAL SAFETY • Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adaptor plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. • Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators.
• Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. • Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
headline bars 8 model no. 060-1550-0 | contact us 1-800-689-9928 • Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions. Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire. SERVICE • Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
CFM ................ Cubic feet per minute MPH ................ Miles per hour ................ WARNING – To reduce the risk of injury, user must read instruction manual. ................ WARNING – To reduce the risk of injury, always wear eye protection. ................ WARNING – To reduce the risk of injury, always wear ear protection. .........
headline bars 10 model no. 060-1550-0 | contact us 1-800-689-9928 PACKAGE CONTENTS: Cordless blower, blower tube. KEY PARTS DIAGRAM 3 continuation tabs KEY PARTS DIAGRAM 2 1 notes No. Description 1 Blower tube 2 Trigger-lock lever No. Description warnings 3 Variable-speed trigger switch Before attempting to use this tool, become familiar with all of its operating features and safety requirements.
OPERATING INSTRUCTIONS TO ATTACH BATTERY PACK (fig 1) 1. Make sure that the switch is in the OFF position. fig 1 Battery-release button 3. Ensure that the battery-release button on the battery pack snaps into place and that battery pack is secured to the tool before beginning operation. TO DETACH THE BATTERY PACK (fig 1) 1. Ensure that the switch is in the OFF position. 2. Depress the battery-release button located on the front of the battery pack to release the battery pack. 3.
headline bars 12 model no. 060-1550-0 | contact us 1-800-689-9928 TO TURN THE BLOWER ON (fig 3) 1. To turn the blower on, depress the variable-speed trigger switch. fig 3 Trigger-lock lever Variable-speed trigger switch 2. The variable-speed trigger switch delivers higher speed with increased trigger pressure and lower speed with decreased trigger pressure. OPERATING INSTRUCTIONS 3. To lock the blower on the chosen speed, move the trigger-lock lever toward the back ofcontinuation the tool. tabs 4.
MAINTENANCE The tool may be cleaned most effectively with compressed dry air. Always wear safety goggles when cleaning tools with compressed air. Before each use: Check for damaged, missing, or worn parts. • Check for loose screws, misalignment or binding of moving parts, or any other condition that may affect the operation. • If abnormal vibration or noise occurs, turn the tool off immediately and have the problem corrected before further use.
headline bars 14 model no. 060-1550-0 | contact us 1-800-689-9928 TROUBLESHOOTING Problem The blower does not work. The air velocity is noticeably decreased. Possible causes Solutions The battery pack is depleted. Charge the battery pack. The battery pack or blower is too hot. Turn off the blower and allow the blower and battery pack to cool. The air inlet is blocked by debris. Remove the battery pack and clear the debris.
PARTS LIST EXPLODED VIEW
headline bars 16 model no. 060-1550-0 | contact us 1-800-689-9928 PARTS LIST No. Part No. Description No. Part No.
This product is guaranteed for a period of 3 years from the date of original retail purchase against defects in workmanship and materials, except for the following components: b) Component B: Accessories, which are guaranteed for a period of 1 year from the date of original retail purchase against defects in workmanship and materials.
headline bars 18 model no. 060-1550-0 | contact us 1-800-689-9928 h) this warranty will not apply to normal deterioration of the exterior finish, such as, but not limited to, scratches, dents, paint chips, or to any corrosion or discolouring by heat, abrasive and chemical cleaners; and i) this warranty will not apply to component parts sold by and identified as the product of another company, which shall be covered under the product manufacturer’s warranty, if any.
