SDS

GHS SAFETY DATA SHEET
by
CONCRETE
SECTION V: FIRE FIGHTING MEASURES
5.1 Flammability of the product: Non-ammable and non-combustible
5.2 Suitable extinguishing agents: Treat for surrounding material
5.3 Special hazards arising from the substance or mixture: None
5.3a Products of combustion: None
5.3b Explosion hazards in presence of various substances: Non-explosive in presence of shocks
SECTION VI: ACCIDENTAL RELEASE MEASURES
6.1 Personal Precautions, protective equipment and emergency procedures: Wear personal
protective equipment (See section VIII). Keep unprotected persons away.
6.2 Methods and material for containment and cleaning up: Do not allow to enter sewers/surface or
ground water. Dispose of unwanted materials and containers properly in accordance with all regulations.
SECTION VII: PRECAUTIONS FOR SAFE HANDLING/STORAGE
7.1 Handling
Precautions for safe handling: Do not use for sand blasting. ere are extensive OSHA precautions
required for sand blasting. Ensure good ventilation/exhaustion at the workplace. DO NOT BREATHE DUST. In
dusty environments, the use of an OSHA, MSHA, or NIOSH approved respirator and tight tting goggles is
recommended. Wear appropriate PPE (See section 8). Do not mix with other chemical products, except as
indicated by the manufacturer. Do not get in eyes, on skin or clothing. Good housekeeping is important to
prevent the accumulation of dust.
7.2 Storage
Requirements to be met by storerooms and receptacles:
No special requirements,.
Information about storage in one common storage facility: Not required.
Further information about storage conditions: Keep out of the reach of children.
SECTION VIII: EXPOSURE CONTROL MEASURES/PERSONAL PROTECTION
8.1 Components with limit values that require monitoring at the workplace:
Hazardous Components
Silica Sand, crystalline
CAS No.
14808-60-7
PEL (OSHA)
mg/M
0.1
TLV (ACGIH)
mg/M
0.025 (resp)
4