Safety Data Sheets (SDS)

SDS
In compliance with OSHA HCS 29 CFR 1910.1200
SAFETY DATA SHEET
Product: Edge Glued Panel ( Stain and Paint Grade) - Wood
Revision: 01
Date: 10/29/2020
Page: 3/9
Specific hazards arising from
the chemical:
The combustion of the chemical products or containers may form toxic
and irritating gases such as carbon monoxide and carbon dioxide.
Special protective equipment
and precautions for fire-
fighters:
Self-contained breathing apparatus (SCBA) operated in positive
pressure mode and complete protective clothing. Containers and tanks
involved in the fire should be cooled with water laterally.
6- ACCIDENTAL RELEASE MEASURES
Personal precautions:
Remove sources of ignition preventively. Do not smoke. Avoid
exposure to the product.
Protective equipment:
Use protective equipment as described in Section 8.
Emergency procedures:
It is recommended the installation of fire alarm system and leak
detection in local storage and use of the product. Isolate the leakage from
ignition sources.
Methods and materials for
containment and cleaning up:
Collect the product with a clean shovel or other instrument that does not
disperse the product. Put material in suitable containers and remove
them to a safe place. For disposal, proceed according to Section 13 of
this SDS.
7- HANDLING AND STORAGE
Precautions for safe handling:
Handle in a well ventilated area or with general system of
ventilation/local exhaust. Avoid dusts formation. Avoid exposure to the
chemical. If necessary, use personal protective equipment as described
in Section 8.
Wash hands and face thoroughly after handling and before eating,
drinking, smoking or going to the bathroom.
Conditions for safe storage,
including any
incompatibilities:
Store in a well ventilated place away from sunlight. Keep container
closed. Keep stored at room temperature not exceeding 35°C.
There are not known incompatible materials with the product.
Recommended packaging materials: Stretch film.