Use and Care Manual
6
PLASTIC OR
COPPER LINE
TO COOLER
SHUT OFF VALVE
SILL-COCK
STD. HOSE CONNECTION
The
the plastic keepers along the inside of the unit.
Water Pump
A self-contained water pump continuously circulates water through
percolates water over the media.
1. The pump and water lines are shipped disconnected.
2. The over
push
3. Push the other portion of water line onto the intake port on the pump
.
OverowDrain
4.
5.
6.
7.
desired location
Float Connection
factory set to maintain 2 inches of water in the reservoir. After in-
Water Source Connection
Steady water supply is required for operation of the cooler. If taking
water to the cooler.
Option 1
If
1.
securing them with the threaded jam nut on the outside of
the cooler.
2.
con
14mm wrenc
3. Screw a standard water hose into the connector. Verify wash-
er is in place.
4.
Option 2:
A more
continuously to the cooler.
1.
2.
WATER CONNECTIONS
NUT
TO
T
FLOAT VALVE
WATER LINE
ATTACH POINT
BOTTOM
(see illustrations at right)
INTERIOR
EXTERIOR
-
OPTION 1
INTERIOR EXTERIOR
OPTION 2
WASHER
COOLER
BOTTOM
NUT
1.
2.
3.
4.
6.
5.
LOCATION
OF DRAIN
OVERFLOW
DRAIN