Use and Care Manual
4
For this cooler to effectively cool
a whole house there must be open
windows or doors in each room
where cooling is desired.
NOTE: Evaporative coolers
NOTE: Evaporative coolers
WILL NOT
WILL NOT
work in a Closed Room
work in a Closed Room
EXHAUST
EXHAUST
Door or window should
be open 4 to 6 inches
Ventilation:
air source and an exhaust opening are required to provide
®
p
rovide sufficient air movement without requiring open window
s.
NOTE ABOUT EVAPORATIVE COOLERS
Water bleed or purge:
to keep the media saturated for maximum cooling. Water
purge system via a pump. A purge pump kit (MCP44-PPK) is
details
on purge pump operation.
BEFORE INSTALLING
WARNING: Do not connect electrical power to the unit
until the installation is completed.
sash-style or a slider-style window.
REQUIRED CLEARANCES/ SPECIFICATIONS
•
•
•
Tools & Materials Required: (Not supplied)
•
• s (for drilling pilot holes for mounting
hardware)
•
• Phillips Head Screwdriver
• Silicone or all-weather caulk for sealing closeout panels
to window frame
•
• Spacer material (as required)
Water connection Option 1
• Standard water hose
Water connection Option 2
• Sill-cock valve
•
NOTE: For best results, the open windows/doors
should not be on the windward side on the house.
CAUTION: Water expelled from the cooler must be
routed away from any areas that could do damage to
foundations or other vulnerable areas.
NOTE: Drawings in this manual are for illustrative pur-
posesonlyandmayreectslightdierences
dependingondesignlevelandconguration.