Specification

12
Champion Cooler Corporation certifies that the evaporative air coolers shown
here are licensed to bear the AMCA seal. The ratings shown are based on tests and
procedures performed in accordance with AMCA Publication 211 and comply with
the requirements of the Certified Ratings Program.
MasterCool® Industrial Coolers
dExceptional Quality dProven Reliability dEnergy Efficient
MADE IN
USA
MADE IN
USA
MADE IN
USA
CONSTRUCTION: Heavy gauge galvanized steel is used for cabinet panels and other load bearing components.
Vacuum-formed ABS plastic water reservoirs and thick polystyrene evaporative media shields
keep water from coming into contact with the steel cabinet for long-lasting durability.
EVAPORATIVE The cellulose paper of the evaporative media is treated to ensure a high water absorption
rate and to resist biological degradation .
MEDIA:
FINISH:
All steel components ( excluding the blower wheel, shaft, and pulley) are chemically
treated and covered with an electrostatically-applied polyester finish at a thickness of
1 to 1.5 mil to protect the cooler from scratches and corrosion.
This finish meets or exceeds the following tests:
 1000 - Hour Salt Spray Test ASTM B117
 Abrasion resistance Test ASTM 4060-84
 Impact Resistance Test ASTM D2794
 2400 - Hour Immersion Test ASTM D870
 Adhesion Test ASTM D3359
LIMITED WARRANTY
This warranty is extended to the original purchaser of an evaporative cooler installed and used under normal conditions. It does not cover
damages incurred from accident, neglect, or abuse by the owner. Champion Cooler does not authorize any person or representative to
assume for the Corporation any other or different liability in connection with this product.
TERMS & CONDITIONS OF WARRANTY
This warranty includes lifetime limited coverage on water reservoir against any leakage due to defects in material. From date of installation,
if any original component part provided by Champion Cooler fails due to defect in material or factory workmanship only, Champion Cooler
will provide the replacement parts as follows:
 &abinet components for one year from date of installation
 (YDSRUDWLYHPHGLDIRUWZR\HDUVIURPGDWHRILQVWDOODWLRQ
EXCLUSIONS TO THIS WARRANTY
 &KDmpion Cooler is not responsible for any incidental or consequential damage resulting from any malfunction.
&hampion Cooler is not responsible for any damage received from the use of water softeners, chemicals, descaling
material, plastic wrap, or if a motor of a higher horsepower than what is shown on the serial plate is used in the unit.
&hampion Cooler is not responsible for the cost of service calls to diagnose cause of trouble, or labor charge to repair
and/or replace parts.
HOW TO OBTAIN SERVICE UNDER THIS WARRANTY
Contact the Dealer where you purchased the evaporative cooler. If for any reason you are not satisfied with the response from the Dealer,
write or call: Customer Service Department, Champion Cooler, 5800 Murray Street, Little Rock, AR 72209, 800-643-8341 or e-mail
Champion at: [e-mail]. This limited warranty applies to the original purchaser only.
CHAMPION COOLER
5800 MURRAY ST.
LITTLE ROCK, AR 72209
www.championcooler.com
CSGB
June 2013