Owner manual

ManualsBrandsMastercool ManualsEquipment52251 A_C SYSTEM ANALYZER

1www.mastercool.com























A/C SYSTEM ANALYZER MANUAL

DESCRIPTION USE

1 Round Vane Meter/

Antenna Fan Meter

Socket

Insert round vane meter or

antenna fan meter into socket

to use

2 Pressure Transducer

Socket

Insert pressure transducer

cable into socket to use

3 USB Port Insert USB cable to upload

stored information

4 Type K Thermocouple

Socket

Insert thermocouple into

socket to use

5 Back Light Button Toggles back light on and off

6 Arrow Buttons Navigates screen

7 Calibration Button Use to calibrate pressure

transducer and thermocouple

8 Units Button Toggles between Imperial and

Metric units

9 Enter Button Selects highlighted value

10 Power Button Toggles power on and off

11 Function Buttons Selects operation on screen

directly above key

(F1, F2, F3, F4)

12 Screen Displays information

Antenna Fan Meter

Pressure

Transducer

Assembly

with Cable

Type K

Thermocouple

Round Vane

Meter

Summary of content (8 pages)

PAGE 1
A/C SYSTEM ANALYZER MANUAL 1 2 �� 3 12 4 11 �� 10 5 9 6 �� 8 �� 7 �� Type K Thermocouple Round Vane Meter Pressure Transducer Assembly with Cable Antenna Fan Meter DESCRIPTION USE 1 Round Vane Meter/ Antenna Fan Meter Socket Insert round vane meter or antenna fan meter into socket to use 2 Pressure Transducer Socket Insert pressure transducer cable into socket to use 3 USB Port Insert USB cable to upload stored information 4 Type K Thermoco
PAGE 2
FIRST TIME USE Set the Time • Use POWER button to turn on A/C Analyzer. • Use the ▼ or ▲ buttons to highlight the time. • Press ENTER. • Use the ◄ or ► buttons to highlight the hours, minutes, and AM/PM or 24 hours. • Use the ▲ or ▼ buttons to change the values. NOTE: to change to AM or PM, add or subtract 12 hours. • When correct, press F1 to SAVE. NOTE: Press F4 to EXIT without saving. Set the Date • Use POWER button to turn on A/C Analyzer. • Use ▼ or ▲ buttons to highlight the date. • Press ENTER.
PAGE 3
• Use ► or ◄ buttons to highlight digit and ▲ or ▼ buttons to change digit value. • Press ENTER to toggle between Height and Width. NOTE: Be sure to press ENTER for both Height and Width before pressing done. • Press F1 when DONE entering duct size. • Place round vane meter or antenna fan meter perpendicular to air ﬂow to read volume. TARGET SUPERHEAT TESTING • Target Superheat Testing uses the round vane meter or antenna fan meter. For round vane meter, twist sensor cover to the Open position.
PAGE 4
• Press F2 (NEXT). • Insert plug for clamp-on thermocouple into type K thermocouple socket. • Follow screen instructions to place clamp-on thermocouple. • When temperature has stabilized, press ENTER. • Press F2 (NEXT). • Actual Superheat will be displayed. • If Target Superheat test has been done, press F1 (ANLY) for analysis. To use Pressure Transducer to Calculate Superheat • Use ▲ or ▼ buttons to highlight Calculate. • Press ENTER. • Use ▲ or ▼ buttons to select refrigerant. • Press ENTER.
PAGE 5
to system. • When saturated temperature stabilizes, press ENTER. • Press F2 (NEXT). • Insert plug from clamp-on thermocouple into type K thermocouple socket. • Follow screen instructions to place clamp-on thermocouple. • When temperature has stabilized, press ENTER. • Press F2 (NEXT). • Actual Subcool will be displayed. SAVING TEST INFORMATION (NEW ENTRY) • Use NEW ENTRY to save testing information under Customer, Technician, and Date. To enter a New Customer • Use power button to turn on A/C Analyzer.
PAGE 6
NOTE: The Customer or Test can be deleted by pressing F2 (DEL) when they are highlighted. CALIBRATION • Use POWER button to turn on A/C Analyzer. • From MAIN MENU press CAL button. For Thermocouple Calibration NOTE: Press F4 (EXIT) in Thermocouple Cal 1 Screen to return to MAIN MENU without saving, or F2 (PT) to calibrate the pressure transducer. • Insert thermocouple into thermocouple socket. • Place thermocouple at known temperature and allow temperature to stabilize.
PAGE 7
• USB connection • 6 AA batteries Round Vane Temp. Range/Resolution/Accuracy: • -20 to 60˚C (-4 to 140˚F) • 0.1˚C (0.2˚F) • ±0.6˚C (1.1˚F) (-20 to 50˚C (-4 to 122˚F)), ±1.2˚C (2.2˚F) at other range Humidity Range/Resolution/Accuracy: • 0.1% to 99.9% RH • 0.1% RH • ±3% RH (at 25˚C (77˚F), 10 to 90% RH), ±5% RH at other range Windspeed Range/Resolution/Accuracy: • 0.6 to 32 m/s • 0.1 m/s • ±2% of full scale Antenna Type Meter Temp. Range/Resolution/Accuracy: • -20 to 60˚C (-4 to 140˚F) • 0.1˚C (0.
PAGE 8
USA: PH (973) 252-9119 BELGIUM: TEL. + 32 (0) 3 777 28 48 8 www.mastercool.