User manual

TCR1000UserManual–Rev.2.0.3 Page8


Installation
Hardware
PCIcard
TheTCR1000cardwillneedtobeinstalledbeforeinstallingthesoftwaredevicedrivers.


TheTCR1000isastaticsensitivedevice,whichcanbedamagedbyESD.Observetheproper
precautionsforhandlingstaticsensitivedevices.DamagesustainedtotheTCR1000dueto
ESDormishandlingisnotcoveredunderwarranty.

FollowthestepsbelowtoinstalltheTCR1000PCIcard.
1. Shutdown
thecomputerandremovethepowercord.
2. RemovethecomputercaseandlocateanavailablePCIslot.
3. IdentifywhichtypeofPCIbracketthecardrequires.
a. Ifneed,replacethebrackettothePCIcard.
4. InserttheTCR1000intothePCIbusslotandsecurewith
retainingscrew.
5. Installthecomputercase.
6. Pluginthepowercord.
7. Poweronthecomputer.
