User manual

TCR1000UserManual–Rev.2.0.3 Page21


Troubleshooting
Unabletolocktotimecode
Possiblereasons/solutions:
1. TCR1000isnotcurrentlyconnectedtoavalidtimecodereference.
2. TimeCodereferenceisnotarecognizedformat.
3. Verifythatthecableandconnectorisinworkingcondition.
4. Signalleveloftimecodeisnotatacceptablelevels.


Notdisplayingthecorrectlocaltime.
Possiblereasons/solutions:
1. Theunitisnotreceivingtimecode.
2. ThetimecodereferenceisreferencedtoUTCbutyourlocaltimezonereferenceofyourtime
referenceandthensetthetimezoneoffsettoarriveatacorrectlocaltime.
3.
Ifthetimecodereferenceisalreadyprovidingtimewithlocaltimezoneand/orDSToffsets,
thensetthetimezoneand/orDSToffsetoftheTCR1000toUTC.Ifthetimereferenceis
providingUTCtime,thenconfigureyourTCR1000tohavealocaltimezoneand/orDSToffset.
4. Yourtimecodereferenceisnotprovidingthetime/datethatyouexpect.Contactthe
individualresponsibleforthetimereferenceformoreinformation.

DSTisnotproperlynegotiated
Possiblereasons/solutions:
1. VerifytheDSTisenabledontheTCR1000.
2. VerifythatthecorrectformatofDSTisenabled(US/EU).
