User manual

TCDS Series User Manual – Rev. 2.0.1 Page 25
Time Code Settings
To use the automatic DST adjustments requires that date/year encoding is enabled.
This product contains an automatic detection and gain control circuit for the incoming SMPTE
30/25/24 fps longitudinal/linear time code or for IRIG-B(0) pulse width modulated or IRIG-B(1)
amplitude modulated time code.
To support common SMPTE/IRIG-B standard time codes without date/year encoding to the
aforementioned standards, an option of ignoring the date information encoded in the time code is
provided.
Display Properties
The settings on this window control how the clock displays time, date and level of brightness.
Display Properties configurations will be applied after you click [OK] and then click [Apply]
from the main window.