User manual

TCDS Series User Manual – Rev. 2.0.1 Page 11
Connections
Un-balanced Signal: Connect the 50 ohm (Ω)
RG59 coaxial cable (not included) to the BNC
connector, located on the back panel.
Balanced Signal: Secure the wires (not included) to
the terminal block, located on the back panel.
AC: Insert the IEC, AC power cord into the
IEC socket located on the back panel.
UDC-RCU control: Insert the 6P6C cable,
included with UDC-RCU, in to the RJ12 socket.