User manual

Masterclock RC 500 User Manual – v2014.01.01
44
Care and Cleaning
Adherence to regular and proper cleaning procedures is recommended to preserve appearance.
Scratched or otherwise damaged lens caused by misuse, mishandling and improper storage or improper
cleaning is not covered under the limited warranty.
Job Site Precautions
It is recommended the unit be removed and stored in a protective area during painting and/or
construction.
Stainless Steel Case
If your unit has a stainless steel case, a cleaner and polish designed for use on stainless steel is
recommended. Use a recommended product to maintain and protect the stainless steel finish while
resisting water spots and fingerprints.
Compatible Cleaners and Polish
The following cleaning and polish agent has been found to be compatible with the stainless steel case
finish. Manufacturer's instructions should be followed. Magic® Complete™ Stainless Steel Cleaner and
Polish Spray (Magic American Products.)
Washing to Minimize Scratching
Fresh paint splashes, grease and smeared glazing compounds can be removed easily before drying by
rubbing lightly with a good grade of naphtha or isopropyl alcohol. Follow the alcohol rub with a mild
detergent wash with warm water and end with a thorough rinsing with clean water using a clean damp
lint free cloth.
Foreign Substance Removal
 Butyl Cellosolve (For removal of paints, marking pens, lipstick, etc.)
 The use of adhesive tape or lint removal tools work well for lifting off old weathered paints.
 To remove labels, stickers, etc., the use of kerosene, naphtha or petroleum spirits is generally
effective. When the solvent will not penetrate sticker material, apply heat (hair dryer) to soften
the adhesive and promote removal. Gasoline should never be used.