User manual

Masterclock RC 500 User Manual – v2014.01.01
39
reboot
Reboot the device
reflossdashes
Show or change displaying dashes on reference loss
settodefault
Reset the device to factory default or restart
Speaker - Default: On
Show or change the speaker output setting
status
Show status information by querying the device
parameters. This includes information regarding the
reference to UTC, local time, displayed time, whether it
is synchronized, etc.
telnet - Default: 23
Show or change the Telnet port and/or turn off Telnet
access.
time
Show or change the time and date. This is useful in
situation where NTP server synchronization is not
available but reasonably correct time/date is desired on
the display. When the network device has access to NTP
servers, information obtained via NTP will automatically
overwrite any manually established time/date.
Therefore, practical use of this feature requires the
device to be removed from the network or for NTP
server configuration to be left undefined.
timezone - Default: UTC
The Time Zone Bias indicates the offset from UTC. Enter
the time in HH:MM:SS format as indicated, including the
plus or minus sign to indicate positive or negative bias.
Remember that this field can also be set from DHCP, so
check with your network administrator if you are getting
inexplicable results.
zeros - Default: Off
Show or change the leading zero setting.
?
Displays the list of Telnet commands.
/?
Follow a command with “/?” to see specific help for that
command.
help
Displays brief help when followed by a command.