User manual

Masterclock RC 500 User Manual – v2014.01.01

Time adjustments are changes to the internal time reference as compared to the NTP server.

1. While acquisition of NTP server.

 Initial startup

 After loss of power

 After loss of NTP

2. Change to the device configurations.

 Network Configuration

 Reset Device

In addition to the standard status indications, the network device will display a special error

indicator under the status window if either a DHCP server cannot be located, or if the device has

an IP address conflict due to either DHCP or Static IP addressing. Under these conditions the

unit will also be assigned a fallback IP address of “169.254.xxx.xxx”, and appear in RED text

under the main WinDiscovery window. To determine the cause of why the device received a

“169.254.xxx.xxx” address the user should display the status of the clock. Near the bottom of

the Status window the error will be displayed