User manual

Masterclock RC 500 User Manual – v2014.01.01
29
Use the buttons located in the center to move a device from the “Available” to the “Assigned” column.
Move all available clock displays by pressing [All >] and [< All] respectably and [>] and [<] to move
individual clock displays. When finished, click [Ok] and the assignment will be saved.
Clear All Device Assignments / Reset All Control Assignments
This feature allows the end user to clear all RC500s and clock displays association.
By clicking [OK], all RC500s and clock displays on the network will have their assignments
cleared. This is a global “clear all” and in order for a RC500 to control a clock display, it will
need to go through the “Clock Assignment” configuration.