User manual

Masterclock RC 500 User Manual – v2014.01.01

COMMUNICATIONS CONTROL (TELNET OPTION)

Certain advanced features may be configured using the

[Communications Control] button. This gives access to

the “Telnet Control” window (below). If Telnet is

allowed, the port must be defined. The default Telnet

port is 23. See your network administrator if you need

additional information.

CLOCK CONTROL SETTINGS

Click the [Clock Control Settings] button to access the

RC500 “Clock Assignment” window.

Use this menu to configure which remote NTP clock displays will respond to the RC500 commands. The

list in the left column is the available clock displays and the right column show the devices assigned to the

RC500.