User manual

Masterclock RC 500 User Manual – v2014.01.01
22
Device Settings
The device settings window will display network device and can be configured to display time in the
format that you prefer, using time zone offsets and DST settings to completely customize it relative
to UTC time.
The top right section of the Window shows the current firmware version and serial number of the
device.
When working in these management windows use the [Apply], [Apply and Close] and [OK] buttons
to accept changes that you have made. Any changes made in these windows will not be saved until
you click the [OK] to exit the window or the [Apply] or [Apply and Close].
Use the [Cancel] button to exit the screen without applying changes.
INPUT CONTROL
The [Input Control] button provides access to
the “Input Control” window, which provides
button for NTP Client.
Device Settings – Input Control is circled.
Clock Control is surrounded by yellow.