User manual

Masterclock RC 500 User Manual – v2014.01.01

Time Display Format

::

________:

The unit can display time in 24 or 12 hour formats. When set

to 12 hour format, the AM/PM indicator will be on during the

PM hours.

Time Zone Offset

To have the unit display time other than UTC, press [HOUR] to

select positive (+) or negative (-), press [MINUTE] to select the

hour and press [SECOND] to select the minutes.

Do not adjust for DST in Time Zone Offset. Set DST

from the next menu setting, Daylight Saving Time.

::

___::

___::

Daylight Saving Time

There are three options for DST settings. For information of

standards for United States/Canada and European Union DST,

please refer to the section, “Daylight Saving Time” in the

previous section of this manual.

::

________:

________:

Time Displayed

In addition to time zone offset, the display can show UTC or

local time (i.e. time zone offset + daylight saving time).

::

________:

Leading Zero

This feature will allow a “0” to be displayed for the first digit,

between the hours of 1 and 9.

::

________:

The RC500 “Display Properties” will not affect the

remote clock display settings.

Changes made using WinDiscovery will over-write the standalone settings and vice

versa.