User manual

CLKTCDSeriesUserManual–Rev.2.0.1Page21


DIPswitchbank2(S2)configureshowTimeCodeControlBits/Fieldsarehandled.
S2.1andS2.2
TimecodeControlBitsorControlFields
HouroffsetS2.1 S2.2 
Noadditionalencoding OFF OFF (default)
IRIG1344&SMPTELeitch ON OFF
Reservedforfutureuse  OFF ON
Reservedforfutureuse ON ON 

S2.3andS2.4
Controlthefaceplateilluminationlevel,ifyourclockhasthisoptioninstalled.
IlluminationLevel(Brightness) S2.3 S2.4 
0%OFF OFF (default)
35%ON OFF
70% OFF ON
100%ON ON 

S2.5
Thisswitchiscurrentlyundefinedandreservedforfutureuse.
Function  S2.5 
Reserved  OFF (default)
Reserved  ON

S2.6
Setthesecondhandmotionmode
Function  S2.6 
Sweep(continuous) OFF (default)
Step(pulse)  ON

S2.7
Calibratehandstoposition.UsedinconjunctionwithS2.8“ON”tosettheclockhands
Function  S2.7 
Setto12:00:00 OFF (default)
Setto6:00:00  ON

S2.8
UsedinconjunctionwithS2.7tosettheclockhands
Function  S2.7

RunOFF (default)
SetON



OncetheclockhasbeenconfiguredwiththeCLKTCDSetsoftware,theswitchsettingswillbe
over‐riddenandtheunitwillignoreallswitchsettingsuntilit’sresettofactorydefault.
