Installation manual

ManualsBrandsMASTERCALL ManualsComputer equipmentMC-4044 SERIES 5

__________________________________________________________________________________________________

Operator Manual for MC-4044 Series 5 G/93040 Issue 6 Page 6

SYSTEM CONFIGURATION CODES

Using either the MASTERCALL Keypad or by Remote Control, enter System access code * 67 03 #, listen for "Please

enter command"

COMMANDS

* nn where nn is option code number

n = entry

# = scroll down to next option number

* * = abandon (do not save any changes)

* # = store (save any changes)

After either storing or abandoning program changes you can continue to make other programming changes, press # # to

end, or simply hang up.

OPTION CODE ENTRY RESPONSE

EITHER LINE DIVERSION * 60 "60 is n, please enter command"

Both lines

1 1

Line 1 only 2 2

Line 2 only 3 3

TYPE OF DIALLING * 61 "61 is n, please enter command"

Tone/Pulse Auto 1 1

Tone (DTMF)

2 2

Pulse (DEC) 3 3

TELEPHONE LINES * 62 "62 is n, please enter command"

Direct exchange lines L1 & L2

1 1

‘O pause’ PABX extensions L1 & L2 2 2

Exch L1, PABX L2 3 3

PABX L1, exch L2 4 4

DELAY BEFORE RVA START ON L1 * 63 "63 is n, please enter command"

n x 3 secs (eg. 2

x 3 = 6 secs) 2 2 (In increments of 3 s up to 27 s)

SILENCE DISCONNECT * 64 "64 is n, please enter command"

n x 20 secs (eg. 8

x 20 = 160 secs) 8 8 (In increments of 20 s up to 180 s))

0 = unlimited (4 hrs) 0 0

CALL TIME LIMIT * 65 "65 is n, please enter command"

n x 5 mins(eg. 8

x 5 = 45 mins) 8 3 (In increments of 5 mins up to 45 mins)

0 = unlimited (4 hrs) 0 0

DECADIC (PULSE) DETECTION * 66 "66 is n, please enter command"

1 1

Yes 2 2

SPARE * 67 "67 is n, please enter command"

Not currently used 0 0

ANSWER DETECT MODE FOR

CALL CONNECTION * 68 "68 is n, please enter command"

Connect on speech or cessation of valid ring tone

1 1

Only connect on cessation of valid ring tone 2 2

Auto-answer, dial and connect 3 3