Installation manual

__________________________________________________________________________________________________
__________________________________________________________________________________________________
Operator Manual for MC-4044 Series 5 G/93040 Issue 6 Page 5
To Disable The Personalised Diversion Announcement (from the Keypad):
1. Press 70
2. The display reads ‘off’.
Standard Identification Announcement
A standard announcement "Hello this MASTERCALL" is played to the receiving party on answering a diverted call.
To Enable The Standard Identification Announcement (from the Keypad):
1. Press 81.
2. The display reads ‘on’.
To Disable The Standard Identification Announcement (from the Keypad):
1. Press 80.
2. The display reads ‘off’.
Personalised Identification Announcement (Optional)
A personally recorded announcement (recordable from any telephone),announcing from where the diverted call has
originated, is played to the receiving party when they first answer a diverted call. For example: "Melbourne Office". This
feature will only work if MASTERCALL is fitted with the PRVA daughter board.
To Record The Personalised Identification Announcement (by Remote Control):
1. Call line 2 of MASTERCALL, listen for one ring, hang up and wait a few seconds.
2. Redial line 2 and wait for greeting "Hello, this is MASTERCALL, please enter PIN".
3. Enter your four digit PIN.
4. Press 85.
5. Listen for "Record Announcement".
6. Dictate your announcement clearly then press #. The announcement will be replayed. Repeat steps 4 - 6 if necessary.
The announcement is automatically enabled.
7. To replay the announcement you can press 84.
8. Enter other programming changes or hang up.
Summary: Enter PIN, 85...record announcement...#, hang up.
To Enable The Personalised Identification Announcement (from the Keypad):
1. Press 82.
2. The display reads ‘on’.
To Disable The Personalised Identification Announcement (from the Keypad):
1. Press 80.
2. The display reads ‘off’.
Notes:
The Diversion Announcement and the Identification Announcement can be independently enabled or disabled from the
Keypad or by Remote Control from any remote telephone. Recording the announcements can only be done by Remote
Control.