Installation guide

__________________________________________________________________________________________________
Technical Guide for Office Extender T/95081 Issue 5 Page 1
__________________________________________________________________________________________________
SYSTEM CONFIGURATION CODES
Using either the Extender Keypad or by Remote Control, enter System access code * 67 03 #,listen for “Please enter
command”
COMMANDS
* nn where nn is option code number
n = entry
# = scroll down to next option number
* * = abandon (do not save any changes)
* # = store (save any changes)
After either storing or abandoning program changes you can continue to make other programming changes, press # # to
end, or simply hang up.
OPTION CODE ENTRY RESPONSE
TYPE OF DIALLING * 61 “61 is n, please enter command”
Tone/Pulse Auto 1 1
Tone (DTMF)
2 2
Pulse (DEC) 3 3
TELEPHONE LINES * 62 “62 is n, please enter command”
Standard
1 1
‘O pause’ PABX extensions L1 & L2 2 2
Exch L1, PABX L2 3 3
PABX L1, exch L2 4 4
SPARE * 63 “63 is n, please enter command”
SILENCE DISCONNECT * 64 “64 is n, please enter command”
n x 20 secs (eg. 8
x 20 = 160 secs) 8 8 (In increments of 20 secs up to 180 secs)
0 = unlimited (4 hrs) 0 0
CALL TIME LIMIT * 65 “65 is n, please enter command”
n x 5 mins (eg. 8
x 5 = 45 mins) 8 8 (In increments of 5 mins up to 45 mins)
0 = unlimited (4 hrs) 0 0
H.I.M. MODE * 66 “66 is n, please enter command”
On
1 1
Automatic 2 2
MODE OF OPERATION * 67 “67 is n, please enter command”
Dial Mode 1 1
Hold Mode 2 2
Call Back Hold Mode 3 3
Telecommuting Mode 4 4
ACD Agent Mode
5 5
Dial Mode without Log on/off prompts 6 6
ANSWER DETECT MODE FOR
CALL CONNECTION * 68 “68 is n, please enter command”
Connect on speech or cessation of valid ring tone
1 1
Only connect on cessation of valid ring tone 2 2
Dial and connect 3 3