________________________________________________________________________________________________ MASTERCALL TELEPHONE CALL DIVERTER MODEL MC-4044 SERIES 8 ________________________________________________________________________________________________ INSTRUCTION AND INSTALLATION MANUAL G/99120A EDITION 3 JULY, 2006 ACA SUPPLIER’S CODE N468 ________________________________________________________________________________________________ DESIGNED AND MADE IN AUSTRALIA DESIGN TWO THOUSAND PTY LTD TELEPHON
__________________________________________________________________________________________________ MASTERCALL MC-4044 SERIES 8 TELEPHONE CALL DIVERSION SYSTEM ________________________________________________________________________________________________ Section 1 General Description of MASTERCALL MASTERCALL MC4044 Diverter 1 Section 2 Installation Instructions Diverter Connection 1 Section 3 Programming Instructions Display Panel Diversion Activate/Deactivate Diversion Number(s) Identification Tone
__________________________________________________________________________________________________ MASTERCALL MC-4044 SERIES 8 TELEPHONE CALL DIVERSION SYSTEM DESIGN TWO THOUSAND PTY LTD MELBOURNE AUSTRALIA SECTION 1 – GENERAL DESCRIPTION OF THE MASTERCALL SYSTEM The MASTERCALL Call Diverter manufactured by Design Two Thousand Pty Ltd diverts incoming calls on one line via a second line to any dial up telephone number.
__________________________________________________________________________________________________ SECTION 3 – PROGRAMMING INSTRUCTIONS DISPLAY PANEL ⊗ LINE 1 ⊗ TX ⊗ POWER ⊗ LINE 2 ⊗ TONE ⊗ DIVERT INDICATOR POWER DIVERT LINE 1 LINE 2 TX TONE 8. 8.
__________________________________________________________________________________________________ Identification Tone When a diverted call is answered, MASTERCALL can send a special connect tone to indicate the diversion and that the audio path is open to the caller. To activate the ID Tone, press 81. To deactivate the ID tone, press 80. Call Counter (Option) Press 30 and MASTERCALL will display the number of successful diversions (0-999). Press 30 then * if you wish to reset (clear) the counter.
__________________________________________________________________________________________________ RECORDED VOICE ANNOUNCEMENTS (RVA) MASTERCALL can play a digitally recorded announcement to the caller while the call is being re-directed to another number. MASTERCALL can also announce the origin of the diverted call to the party receiving calls. The Digital Voice Announcer represents the latest in digital EPROM and EEPROM based voice announcements.
__________________________________________________________________________________________________ Personalised Identification Announcement (Optional) A personally recorded announcement (recordable from any telephone),announcing from where the diverted call has originated, is played to the receiving party when they first answer a diverted call. For example: “Melbourne Office”. This feature will only work if MASTERCALL is fitted with the PRVA hardware.
__________________________________________________________________________________________________ SYSTEM CONFIGURATION CODES Using either the MASTERCALL Keypad or by Remote Control, enter System access code * 67 03 #, listen for “Please enter command” COMMANDS * nn where nn is option code number n = entry # = scroll down to next option number * * = abandon (do not save any changes) * # = store (save any changes) After either storing or abandoning program changes you can continue to make other programming
__________________________________________________________________________________________________ SECTION 4 - DESCRIPTION OF OPERATION MASTERCALL is a call redirection unit capable of dialling out a preset number(s). Tone and line current detection is provided in software to determine when a call has been answered. MASTERCALL then connects the incoming call to the answering party. The lines are released when either or both parties hang up.
__________________________________________________________________________________________________ SECTION 6 - CONNECTIONS TELEPHONE LINE 1 PIN 1 2 3 4 5 6 DESCRIPTION Ring (Lb) Tip (La) LINE 2 PIN 1 2 3 4 5 6 DESCRIPTION Ring (Lb) Tip (La) ALARM INPUT & AUXILIARY OUTPUT RELAYS PIN 1 2 3 4 5 6 7 8 DESCRIPTION Relay 1 Normally Open Relay 1 Common Relay 1 Normally Closed Alarm In Ground Relay 2 Normally Open Relay 2 Common Relay 2 Normally Closed PIN 1 2 3 4 5 6 7 8 DESCRIPTION PTT Common PTT Normal
__________________________________________________________________________________________________ PC RS232 COM 1 (Configured as DCE) PIN 1 2 3 4 5 6 7 8 DESCRIPTION CD (Common to Modem) RI (Common to Modem) RXD (Data received by PC) DTR (Common to Modem) TXD (Data Transmitted by PC) Ground RTS (Common to Modem) CTS (Common to Modem) MODEM RS232 COM 2 (Configured as DCE) PIN 1 2 3 4 5 6 7 8 DESCRIPTION CD (Common to PC) RI (Common to PC) RXD (Data received by Modem) DTR (Common to PC) TXD (Data Transmit
__________________________________________________________________________________________________ SECTION 6 - GENERAL PROGRAMMING SUMMARY Divert activate/deactivate Check first diversion number Check second diversion number Change first diversion number Change second diversion number Enter hash (#) Enter star (*) Enter dialling pause Check call counter Reset call counter 1 21 # 22 # 21 nnnn nnnn # 22 nnnn nnnn # ## ** *# 30 30 * Check second call counter Reset second call counter 60 60 * Deactivate di
__________________________________________________________________________________________________ Select first number Select second number Select third number Select fourth number Select fifth number Select sixth number Select seventh number Select eighth number 41 42 43 44 45 46 47 48 EPROM version number * 48 # Forced disconnection Amp down Amp up *# # 66 # * 66 # Enable keypad Disable keypad * 3333 # # 3333 # Auto-Turn On *6703# *24 sss *# Store or change PIN * #0 pppp # Access to system op
__________________________________________________________________________________________________ SPECIFICATIONS AMPLIFIER Frequency Range Input - Output Impedance Return Loss Insertion Gain Output Level Noise Method of operation 300 Hz to 3.4 kHz (-3dB). 220 ohm + 120 nF // 820 ohm (complex). > 17 dB, 300 Hz to 3400 Hz. 30 dB +/- 2 dB maximum. -10 dBm → 0 dBm programmable. < -50 dBm unweighted, 300 Hz to 3.4 kHz. Software controlled semi/full duplex.
__________________________________________________________________________________________________ GENERAL Power Input 12 → 48 V dc (nom.) (12 V 750 mA power adaptor supplied. Power Consumption Stand-by 250mA (3W) @ 12 V Operating typically 380 mA (4.5W) @ 12 V. Remote Control ‘Touch Tone’ DTMF telephone or encoder, with Talk-back. Telecom Connection Mode 1 (parallel) or mode 3. Enclosure Desk Top Powder coated, metal enclosure. Dimensions W350mm x D240mm x H25 - 60mm.
