Use and Care Manual
10
1. Mount the control panel and element onto the bracket on the outer shell.
NOTE: The control panel is correctly attached when the heating element is positioned inside of the inner
pot and fully submerged in oil or water during use.
2. If cooking with water, fi ll pot to the MIN 1.5 gallons (6 qts.) or MAX 2.75 gallons (11 qts.) fi ll line. If cooking
with oil, always fi ll pot to the MAX fi ll line.
3. Attach the breakaway power cord to the control panel. Plug the breakaway power cord into an outlet
(refer to the “WARNINGS AND IMPORTANT SAFEGUARDS” section of the manual). The orange power light
will turn on indicating that the appliance is plugged in and the element and control panel are mounted
correctly to the mounting bracket.
4. Turn the dial to set the temperature. The green ready light will turn on when the appliance has reached
the set temperature and is ready for use.
5. When cooking time has elapsed and food is done, unplug the power cord from the outlet. Carefully lift the
basket with the double lifting hook (see Figure A below). Allow excess oil or water to drain by hooking the
drain clip on the basket into the drain clip mounting hole (see Figure B below).
Operating Instructions
• When using the drain clips on the basket, make sure that the basket is fi rmly in place in the drain clip
mounting hole before releasing the handle so that the basket will not fall back into hot oil or water
causing personal injury.
WARNING
Figure A Figure B
DRAIN CLIP
MOUNTING HOLE
DRAIN
CLIP