Instructions / Assembly

7
Thermometer Safety Check:
• Before each use place the thermometer stem in
boiling water and ensure that it registers approximately 212º F
(100º C) +/- 20º.If it does not contact Masterbuilt to
order a replacement.
• When thermometer is lowered into HOT oil do not
allow it to pierce into the turkey or food. This will
give a false reading.
• When the thermometer is in place the dial will continue to rise.
Keep a constant check on the dial to ensure the dial indictor does
not stop before reaching 350º F (170º C)
• If the oil starts to smoke and the thermometer dial stops before
reaching 350º (170º C) turn burner off and STOP COOKING
IMMEDIATELY. A new thermometer is needed.
If the thermometer supplied with the appliance is lost are damaged call
Masterbuilt to order a replacement at 800-489-1581
Model DF12 - 12” Thermometer for turkey and boiling pots.
Model DFTH - 6” Thermometer for shallow fry pans.
Note: Cookers are sold with and without cookware and thermometers.
See Packaging for Contents
Using the Pot with the Drain Hook Basket:
Do not overfill pot with oil or water. A fill line is marked on the larger frying
and boiling pots. Smaller fry pans may not be marked.
1. Place seasoned food into basket.
2. Slowly lower basket into oil or water using lifting hook.
(Wear Protective Gloves)
3. Cover with lid.
4. When food is ready to remove, turn the burner to OFF
position. Remove lid and use the lifting hook to pull basket
up slowly. (Wear Protective Gloves)
5. Hook basket to the side of the pot with the drain hook, allowing
the food to drain and cool.
12
Lifting Hook
Stem
Dial
Drain Hook
Fill Line
Optional Side Shelf Assembly:
Welded Cooker Stand
The legs on this cooker stand are pre-welded.
The only assembly required for this unit is to
mount the burner as shown in the first step.
1. Place wood shelf on top of the “L” shaped legs
as shown and secure with 4 - 1/4”x2 “ long
bolts with lock washer and nuts.
2. The “L” shaped legs will fit onto the
windshield of the cooker stand and are to be
secured with 2 - 1/4”x1 1/2” bolts and nuts.
NOTE: Place bolt from the outside of the
cooker with the nuts to the inside.
1. Mount each cooker leg to the inside of
the windshield and security ring of the
cooker top using 4-1/4 x 3/4 bolts & nuts
per leg.
Cooker Leg
Windshield
Security Ring
Read!
Some cooker stands models
have pre-threaded leg holes.
Nuts are not required.
Secure with nuts if supplied
Outdoor LP
Gas Cooker Stand Assembly Instructions
READ ALL INSTRUCTIONS AND WARNINGS CAREFULLY BEFORE
ASSEMBLY OR OPERATION OF YOUR COOKER.
This Manual has assemble instruction on several cooker model.
Before each use check all nuts and bolts to be sure that
they are tight and secure.
Allow wood shelf to
overhang metal frame
away from cooker stand.
Parts List
Cooker Stand All Welded
Cast Burner, Regulator and
Hose
Parts List
Cooker Head
3 Legs & Hardware
Cast Burner, Regulator and Hose
CAUTION