Instructions / Assembly

ManualsBrandsMaster ManualsBuilding materials1 Gal. Masterflex Ultimate Armour Asphalt Roof Coating Sealer

SPEC DATA SHEET

1 | Page MASTER PAINT & CHEMICAL CORP. CARR#127 KM 12.7 BO. MAGAS GUAYANILLA PR 00656

TEL: 787-835-4000 / FAX: 787-835-2965 / E-FAX: 787-966-7180

Rev. 0

Supersedes September, 2016

Masterflex Ultimate Armour 200®

Innovative Cross-Linking Technology

Over 200 hours of water ponding resistance

SECTION 1 - PRODUCT DESCRIPTION

SECTION 2 - TYPICAL USE

SECTION 3 - PRODUCT ADVANTAGE

SECTION 4 - COLO

SECTION 5 - GLOSS

Masterflex Ultimate Armour 200® is an innovative ultra white acrylic elastomeric roof sealer, based on an exclusive cross-linking technology

that resists critical water ponding conditions. It offers outstanding long-term durability and toughness to prevent leakage and fix roofs with

already leaking problems, caused by capillarity, cracks or joints. Highly resistant to damage caused by UV rays, dirt, water or other common

weather elements. It also has excellent adhesion to concrete, polyurethane foam, galvanized metal and aluminum. It can significantly reduce the

interior temperature up to 20 degrees, resulting in energy savings and cooling costs.

Masterflex Ultimate Armour 200® is used for waterproofing and protection of concrete, polyurethane foam, galvanized metal and

aluminum. With additional advantages it is highly resistant to water ponding (200 hours +). However, for a more durable and efficient

protection, all water ponding areas should be fixed with Masterflex Leveling Repair®. If water ponding areas are not fixed, they must be

repaired by the installation of an efficient drain system and annual maintenance. This maintenance should be done by applying two coats of

MASTERFLEX ULTIMATE ARMOUR 200®.

 2 in 1: Primer & Sealer

 Low water absorption and permeability

 Roof Defense Technology: Polyfiber plus® Technology made out

of resins, fibers and additives.

Certified Roof Formula that reduces mold and mildew on the dry

sealer film, maintaining the roof white to save energy.

Brilliant Ultra White finished

Reflective flat finish

SECTION 6 - COMPOSITION

Cross linking acrylic polymer, titanium dioxide and reflective and inert pigments. Free of lead, chromates and mercury.

SECTION 7 – PHYSICAL AND CHEMICAL PROPERTIES

Viscosity: 115 +/- 5 KU (Stormer) Flash Point: None Weight per gallon: 11.30 +/- 0.15 lb/gal

Solids per Volume: 50 +/-1 % Solids per weight: 65+/-1 %



Excellent dirt pickup resistance

 Ultra white. Reflects 98% of solar rays and reduces interior

temperature up to 20°.

 Fast dry

 LOW VOC: 50g/L volatile organic compounds

 Remains flexible in any weather conditions

 Excellent adhesion to concrete, polyurethane foam, galvanized

metal and aluminum

 Coverage: 400 ft² per pail

Summary of content (4 pages)

PAGE 1
SPEC DATA SHEET Masterflex Ultimate Armour 200® Innovative Cross-Linking Technology Over 200 hours of water ponding resistance SECTION 1 - PRODUCT DESCRIPTION Masterflex Ultimate Armour 200® is an innovative ultra white acrylic elastomeric roof sealer, based on an exclusive cross-linking technology that resists critical water ponding conditions. It offers outstanding long-term durability and toughness to prevent leakage and fix roofs with already leaking problems, caused by capillarity, cracks or joints.
PAGE 2
SPEC DATA SHEET SECTION 8 – SURFACE PREPARATION Roof surface should be cleaned by eliminating all residues of dust, sand, cement, mold, mildew, and strange particles. Use a water pressure machine. Roof’s drain system should be repaired if it does not allow water to exit. For concrete roofs, repair holes that are greater than ½ inch or any water ponding area by using Masterflex Leveling Repair®. Crack Repair: All joints and cracks have to be sealed.
PAGE 3
SPEC DATA SHEET SECTION 12 – FIRST AID In case of skin contact, remove product from skin with soap and water. When eye contact with products occurs, rinse affected area with large amounts of water at least 15 minutes and get immediate medical attention. If swallowed, medical attention is needed immediately. Do not apply late in the day or when rain or dew is likely. Storage the air tight sealed product in a dry and well ventilated environment.
PAGE 4
SPEC DATA SHEET 4|Page MASTER PAINT & CHEMICAL CORP. CARR#127 KM 12.7 BO. MAGAS GUAYANILLA PR 00656 TEL: 787-835-4000 / FAX: 787-835-2965 / E-FAX: 787-966-7180 Rev.