SDS

PHYSICAL AND CHEMICAL PROPERTIES9
Physical State: Mixture packaged in pressurized aerosol spray can.
Odor: solvent
Solubility: Soluble in water
Spec Grav./Density: 0.99-1.03 (concentrate)
Viscosity: 1800 - 2400 cP
Heat Value: 25.9 kJ/g
Flammability: Flammable
Flash Point: -4°F (-20°C) (concentrate) / -156°F (-104.4°C) (propellant)
pH: Not applicable
VOC: 41.07 %
Evap. Rate: >1.00 (BuAc=1)
UFL/LFL: Not established
Appearance: black opaque liquid
STABILITY AND REACTIVITY10
Product is stable under normal conditions.
Heat, sparks, open flames and temperatures above 120°F
Strong Oxidizing Agents.
CO, CO2, and hydrocarbons.
Will not occur.
Stability:
Conditions to Avoid:
Materials to Avoid:
Hazardous Decomposition:
Hazardous Polymerization:
TOXICOLOGICAL INFORMATION11
Not established
ECOLOGICAL INFORMATION12
Not established
DISPOSAL CONSIDERATIONS13
Do not allow into drains or water sources. Waste and empty containers should be disposed of in accordance with regulations made under
the Control of Pollution Act and the Enviromental Protection Act. Using information provided in this data sheet advice should be obtained
from the Waste Regulation Authority, weather special waste regulations apply.
TRANSPORT INFORMATION14
DOT Class: Flammable Gas (2.1) #2.1
UN #: UN 1950, Class: 2, Proper Shipping Name: Aerosols, flammable
Master Rubberized Undercoating
Safety Data Sheet
Revision Date: 5/8/2015MSDS Number: 4986-AP61131
Page of
5 7
SDS
Apollo Technologies, Inc.