Technical data

Manual – MOVI-PLC® advanced DH.41B Controller

MOVI-PLC® advanced DHE41B control card

Technical Data and Dimension Drawings

RS485 interface COM1/2

X34:1 ... X34:4

• To connect a DOP11A operating terminal or a MOVIMOT

gearmotor with integrated frequency

inverter

• I/O standard, 57.6 / 9.6 kBaud, total max. cable length 200 m

• Dynamic terminating resistor installed

SD memory card • PC-readable

• Contents:

–Firmware

– IEC program

–Data

• At least 128 MB memory

• Versions, part numbers and functions:

– OMH41B-T0: 1821 204 2

Functions: Management of speed control, positioning, e.g. with the MPLCMotion_MDX library

– OMH41B-T1: 1821 205 0

Functions: In addition, e.g. electronic cam, electronic gear unit, cam controller

– OMH41B-T2: 1821 206 9

Functions: In addition, e.g. handling

Engineering Engineering takes place via one of the following interfaces:

• Ethernet 2 (X37)

• In preparation: USB (X35)

Engineering for all SEW components connected to the MOVI-PLC

advanced DHE41B control card can

be performed using the MOVI-PLC

advanced DHE41B control card.

Engineering for the MOVI-PLC

advanced DHE41B control card cannot be performed using the inverter.

• PC software MOVITOOLS

MotionStudio with PLC-Editor

MOVI-PLC

advanced DHE41B.. control card

kVA