Technical data

Manual – MOVI-PLC® advanced DH.41B Controller

MOVI-PLC® advanced DH.41B control card

Introduction

Automation

topologies

Use as a stand-alone machine controller

You can use the MOVI-PLC

advanced DH.41B control card as the control unit for a

complete machine.

When no higher-level PLC is used, MOVI-PLC

advanced DH.41B takes over all control

tasks. This means the control card controls drives and other actuators and evaluates

decentralized inputs and outputs.

In this standalone topology, operator terminals (DOP11A) function as the interface

between the operator and machine.

You can connect MOVI-PLC

advanced DH.41B directly to the Ethernet network.

60544AXX

Figure 1: Sample topology for controlling a complete machine as a stand-alone solution using the

MOVI-PLC

advanced DH.41B control card

[1] Operator terminal (e.g. Drive Operator Panel DOP11A)

[2] System bus (CAN 1, CAN 2, Ethernet 1)

[3] Inputs and outputs (terminals)

[4] Asynchronous motor

[5] Synchronous servomotor / asynchronous servomotor

RS485

ETHERNET