Technical data

Manual – MOVI-PLC® advanced DH.41B Controller

Structure of the DP-V1 parameter channel

PROFIBUS-DP-V1 Functions

MOVILINK

return

codes of

parameter setting

for DP-V1

The following table shows the return codes that are returned by the SEW DP-V1

interface in case of an error in the DP-V1 parameter access.

MOVILINK

Return code (hex)

Description

0x0810 Invalid index, parameter index does not exist in the unit

0x0811 Function / parameter not implemented

0x0812 Read access only

0x0813 Parameter lock activated

0x0814 Factory setting is active

0x0815 Value for parameter too large

0x0816 Value for parameter too small

0x0817 Reserved

0x0818 Error in system software

0x0819 Reserved

0x081A Parameter access only via RS485 interface

0x081B Parameter is access-protected

0x081C Reserved

0x081D Invalid value for parameter

0x081E Factory setting was activated

0x081F Reserved

0x0820 Reserved

0x0821 Reserved

0x0822 Reserved

0x0823 Reserved

0x0824 Reserved

0x0505 Incorrect coding of management and reserved byte

0x0602 Reserved

0x0502 Reserved