Technical data

Manual – MOVI-PLC® advanced DH.41B Controller

Configuration for a PROFIBUS DP master

Configuration and Startup

4. Enter the I/O or peripheral addresses for the configured data widths in the "I Address"

[1] and "Q Address" [2] columns.

configurations

To enable the MOVI-PLC

advanced DHF41B control card to support the type and

amount of input and output data to be transmitted, the DP master on the MOVI-PLC

advanced DHF41B control card must transmit the corresponding DP configuration. The

configuration telegram comprises the DP configurations for slots 1 to 3.

You can:

• control the MOVI-PLC

advanced DHF41B control card using process data

• read or write parameters using the parameter channel

• or use definable data exchange between MOVI-PLC

advanced DHF41B and the

higher-level controller (→ section "Universal DP configuration" for slot 3, page 48).

58375AXX

[1] [2]