Technical data

Manual – MOVI-PLC® advanced DH.41B Controller

Configuration for a PROFIBUS DP master

Configuration and Startup

The SEW drive is available under the following path in the hardware catalog: PROFIBUS

+--Additional PERIPHERAL UNITS

+--Drives

+---SEW

+--DPV1

+---MOVI-PLC

The installation of the new GSD file is now complete.

Configuration

with STEP7

Proceed as follows to configure the MOVI-PLC

advanced DHF41B control card with

PROFIBUS DP interface:

1. Add the interface module with the name "MOVI-PLC" to the PROFIBUS structure us-

ing the drag and drop function and enter the station address (→ following Figure).

58365AXX