Technical data

Manual – MOVI-PLC® advanced DH.41B Controller

Configuration with the MOVITOOLS® MotionStudio PC software

Configuration and Startup

• Alternatively, when integrating the MOVI-PLC

advanced DH.41B control card in an

existing network, you can enter the network address (the part of the IP address in

which the bits of the net mask are set) in the "Broadcast IP Address" input field, filled

with set bits for sending broadcast messages in the specified network. In this case,

you do not have to make an entry in the "IP address" field.

Example:

– IP address: 10.3.71.38

– Net mask: 255.255.255.0

– Broadcast IP address: 10.3.71.255

• Next, perform an online scan. To do so, click on the "Online scan" icon in

MOVITOOLS

MotionStudio (→ Following figure).

61027AXX