Technical data

Manual – MOVI-PLC® advanced DH.41B Controller

Configuration with the MOVITOOLS® MotionStudio PC software

Configuration and Startup

Setting the engi-

neering access in

the MOVITOOLS

MotionStudio

•In the MOVITOOLS

MotionStudio, choose the menu item "Network" / "Configure

communication plugs".

• Choose "Ethernet" from the dropdown menu. Click on the Configure SMLP... button.

Confirm your selection by clicking <OK>.

• Click the right mouse button in the empty field "IP addresses of SMLP servers" and

select "Add IP address" from the menu to add the IP address of the Ethernet 2 inter-

face of the MOVI-PLC

advanced DH.41B control card (→ following Figure). Confirm

your entry by clicking <OK>.

61025AXX

61026AXX

[1]