Technical information

INSTALLATION OF THE BURNER

For installing the burner, making the electrical

connections and carrying out the necessary adjustments,

refer to the instruction manual supplied with the burner.

We suggest that the fuel supply lines be built according to

the figures here beside.

For oil versions an adequate filter must be provided

in the fuel suction line.

ADJUSTMENTS

BURNER COUPLING TABLE

The burners that can be used for best heater performance are the following:

RIELLO Oil Burners:

Type Burner

Burner

Nozzle 60°W Nozzle Code Electric

Model

Code (G.P.H.) supply

1 REG 5 3772200 n°1x1,00 1825027 230V 50Hz~

2 R40G10 3452021 n°1x1,50 1825037 230V 50Hz~

RG2 3737700 n°1x1,50 1825028

3 R40G10 3452021 n°1x1,75 1825037 230V 50Hz~

RG2 3737700 n°1x1,75 1825033

4 R40G10 3452021 n°1x2,00 1825037 230V 50Hz~

RG2 3737700 n°1x2,00 1825022

5 R40 G20 3452731 n°1x3,50 1825026 230V 50Hz~

RG 4S 3739600 n°1x3,50 1825024

6 RL 28 tc 3473207 n°2x2,25 1825023 230V 50Hz~

RL 28/1 tc 3472003 n°2x2,25 1825023

RG 5 S 3739900 n°2x2,25 1825023

7 RL 38 tc 3474107 n°2x3,50 1825024 230V 50Hz~

RL 34/1 MZ tc 3470100 n°2x3,50 1825024

BURNER ADJUSTMENT

Only qualified personnel can fit and adjust the burner, holding strictly to the instructions in the Burner Manual.

NB:

The adjustment of combustion air varies according to the characteristics of the chimney, and is done by acting on

the specific damper according to the instructions in the Burner Manual.

All Parts available from

www.sparesgiant.com

01772 329 565