Technical information

Installing examples
MOUNTING THE DISTRIBUTION PLENUM
The heater is supplied with a distribution plenum that is fitted with adjustable guide vanes. The vanes should be
adjusted so that they can ensure a good air distribution:
• Allow adequate air distribution.
• Do not create excess resistance to air flow.
• Do not cause discomfort to people.
The vertical airflow guide vanes must be open. They must not be inclined more than 45° with
respect to the air flow direction. Air diffusion from one side only of the plenum is not allowed.
Safe distance
Guide vanes
orientation
In the middle of the
room – 4 sides outlet
On a wall
3 sides outlet
On a corner
2 sides outlet
1 SIDE OUTLET
NOT ALLOWED!
12
All Parts available from
www.sparesgiant.com
01772 329 565