User manual

F6 SET:

Pressing [F6] brings up the OSD configuration menu. To change a setting:

1. Move the highlight bar to the item you want to change, then press [Enter].

2. On the submenu that appears, an icon of a pointing finger indicates the

currently selected setting. Move the highlight bar to the choice you want

and press [Enter].

An explanation of the settings is given in the table below:

Setting Function

CHANNEL DISPLAY

MODE

Selects how the Port ID is displayed: the Port Number plus

the Name (PN + NAME); the Port Number alone (PN); or

the Name alone (NAME).

CHANNEL DISPLAY

DURATION

Determines how long a Port ID displays on the monitor after

a port change has taken place: 3 Seconds; or Always On.

CHANNEL DISPLAY

POSITION

Allows you to position where the Port ID appears on the

screen. Use the Arrow Keys, Pg Up, Pg Dn, Home, End,

and 5 (on the numeric keypad with Num Lock off), to

position the Port ID display, then press [Enter] to lock the

position and return to the SET submenu.

SCAN DURATION Determines how long the focus dwells on each port as it

cycles through the selected ports in Quick View Scan Mode.

The options are: 3, 5, 10, 15, 20, 30, 40, and 60 seconds.

OSD ACTIVATING

HOTKEY

Selects which Hotkey activates the OSD function: [Ctrl]

[Ctrl] or [Scroll Lock] [Scroll Lock]. The default is the Ctrl

key combination, but this may conflict with programs

running on the computers, in which case, the Scroll Lock

option should be used.

2001-05-21

20 CS-9134 / CS-9138 User Manual