Owner`s manual

Page 18 Bullfrog Spas Owner’s Manual
Freeze Protection
If a freeze condition is detected “ICE” will be
displayed on the panel. The pump(s) will be
automatically activated. This is a normal spa
function; no corrective action is necessary. Freeze
protection is enabled regardless of the spa's status.
High-Limit Sensor Failure (Spa is deactivated)
When the panel display shows “Sn1” the high-limit
temperature sensor is non-functional. This must be
repaired only by an authorized Bullfrog Spa Dealer.
Main Sensor Failure (Spa is deactivated)
If “Sn3”appears on the display, the main sensor is
non-functional. This must be repaired only by an
authorized Bullfrog Spa Dealer.
Standby Mode (Spa is deactivated.)
When “Stby” appears on the panel display, all spa
functions have been disabled except for freeze
control. Press any button on the control pad to reset
the system. The "Standby Mode" is primarily used to
prevent the pumps from being activated while
changing JetPaks, cleaning the filter or cleaning the
skimmer basket.
Warning! Shock Hazard! No User Serviceable
Parts.
Do not attempt service of this control. Contact you
authorized Bullfrog Spa Dealer. Follow all Owner’s
Manual power connection instructions. Installation
must be performed by a licensed electrician, and all
grounding connections must be properly installed.
PREMIUM CONTROL SYSTEM
MASTER CONTROL PAD (Fig. N:)
Liquid Crystal Display
This feature constantly displays the spa
temperature, as well as the various monitoring
functions.
Program Buttons
The “*” button initiates time setting, filter
programming, and panel lock routines.
The “#” button is used to switch between Economy
and Standard operation modes and also serves as
an “enter” button to initiate various programming
features.
Time
Press the “Time” button to view the time of day.
(Figure N) Premium Control Pad
Program