Owner`s manual

ADJUSTING FILTRATION - TS FIT
51DO NOT DIVE.
Filter Cycles
Back
Filter Cycle 1
Starts at 12:00 A M
Runs 0 HR 0 Mi n
Ends at 12:00 A M
Filter Cycle 2 N O
Starts at 12:00 A M
Runs 0 HR 0 Mi n
Ends at 12:00 A M
Filter Cycles
Back
Filter Cycle 1
Starts at 6:15 A M
Runs 3 HR 0 Mi n
Ends at 9:15 AM
Filter Cycle 2 N O
Starts at 12:00 A M
Runs 0 HR 0 Mi n
Ends at 12:00 A M
Cancel
Save
Adjusting Filtration
MaiN FiltratioN
Using the same navigation and adjustment as Setting the Time, Filter Cycles are set using a start
time and a duration. Each setting can be adjusted in 15-minute increments. The panel calculates
the end time and displays it automatically.
Filter cycle 2 - optioNal FiltratioN
Filter Cycle 2 is OFF by default.
Simply navigate to the Filter Cycle 2 line by pressing the Right Navigation Button, and when “NO”
is highlighted, press Up or Down to toggle Filter Cycle 2 on and off. When Filter Cycle 2 is ON, it
can be adjusted in the same manner as Filter Cycle 1 by navigating to the right.
It is possible to overlap Filter Cycle 1 and Filter Cycle 2, which will shorten overall filtration by the
overlap amount.
circulatioN puMp ModeS
The 24 Circ Pump is programmed to operate continuously.
purge cycleS
In order to maintain sanitary conditions, as well as protect against freezing, will purge water from
their respective plumbing by running briefly at the beginning of each filter cycle.
If the Filter Cycle 1 duration is set for 24 hours, enabling Filter Cycle 2 will initiate a purge when
Filter Cycle 2 is programmed to begin.
31
DO NOT DIVE.