Owner`s manual

DOLPHIN REMOTE
Operation
64
DO NOT DIVE.
Power Key: (A)
Turns the power on and off to the TV and DVD.
NOTE: To turn on the Kenwood CD player, use the Power
button on the stereo.
Volume Buttons: (C)
Adjusts the volume in the selected device.
Channel Buttons: (H)
In the CD mode, these buttons will scan
CD tracks or scan radio presets. In TV mode,
it will search through the TV channels.
Spa Function Buttons: (D)
Will control the pump 1, 2, 3 and the light operations.
Mode Button: (F)
In the CD device mode, controls power to the unit
and serves as the "Function" button on the CD player.
(Press and hold this button to turn off CD player.) In the
TV device mode, this button will switch to the video input
to watch DVDs and to the tuner for watching TV.
Setup Button: (J)
Use this button to program device codes (see page 65).
Your Dolphin Remote has been preprogrammed at the factory
for all components included. When the batteries are replaced,
the code for each component may need to be reprogrammed.
Device Mode Buttons: (I)
Select unit to control by pressing device button once.
Directional Buttons: (B)
These buttons will navigate through “Menu” options in the DVD device mode.
Numeric Keypad: (E)
These buttons will change the TV channel manually in the TV device mode.
NOTE: If utilizing a satellite receiver it is necessary to point the Dolphin Remote directly
at the receiver as the RF portion of the Dolphin remote is not programmable.
GLOSSARY OF SPA TERMINOLOGY
9. PERSONAL REMOTE CONTROL
The Legend Series spas have additional remotes which allow the user to control the jet therapy
while remaining in his/her seat (if applicable). By pressing the control one time, you will activate
the pump. Press the pad again for high speed and again to turn it off.
10. EQUIPMENT ACCESS PANEL
Located behind the side panel below the Topside Control Panel, this area houses the major
components responsible for the spas operation. Those components include the pumps, heater,
control panel box, ozonator, and LED light system (if applicable). Pump and equipment placement
may vary by model.
11. ACCESS PANELS
These are located on all four sides of the spa. All of the panels are removable should service
be required.
12. DRAINING YOUR SPA
The drain is located behind the front panel on the far right side. You can access the drain by
unscrewing the corner screws and removing the corner panel. Grasp the drain cap, and pull the
assembly out all the way. Unscrew the cap, then push the assembly back in half way to start the
flow of water. Attach a garden hose, if desired. Draining times may vary by model using the externa l
hose bib. A sump pump may also be used to drain the spa quickly. NOTE: When pushing or pulling
the assembly in or out, water will drip from the drain during the transition. This is normal.
13. FILTER LID
Your filter lid will serve to prevent major objects from entering your filter area and possibly
damaging your filter elements which are located under the filter lid. These filter elements
are designed to remove small debris and oils from your spa water.
13
DO NOT DIVE.
Personal
Remote Control
Spa Drain