Owner`s manual

America’s Leader In Luxury
MASTER SPAS
49
DOWN EAST (2 -3 PUMP SYSTEMS)
Jets 2
Press the "Jet 2" button once to turn pump 2 on or off. If left running, the pump
will turn off after 15 minutes. *
Jets 3
Note: For SE models only. Press the "Jets 3" button once to turn pump 3 on or
off. If left running, the pump will turn off after 15 minutes. *
Light
Depending upon how your spa is equipped and configured, the "Light" button
will operate in one of the following ways:
1.) Press the "Light" button to turn the spa light on and off.
2.) If an LED light with color rotation is installed, press the "Light" button once
to start the light and wheel, and then again to turn the light off.
If any light is left on, it will automatically turn off after 4 hours.
Setting Filter Cycles
The first filter cycle ("day") begins 6 minutes after the spa is powered up. The
second filter cycle ("night") begins 12 hours later. Filter duration is programma-
ble for 1 -12 hours (F1-F12). The default filter time is 2 hours. To program,
press "Cool" or "Warm" then "Jets 1". Press "Cool" or "Warm" to select the
filter duration. Press "Jets 1" to select the number of filter cycles. The display
will show "dn" (both "day" and "night" cycles); "d" (day cycle only); or "n"
("night" cycle only). Press "Cool" or "Warm" to adjust, then continuous
filtration, use F12 and "dn".
*15-minute timeouts may be changed to 30 minutes and 2-hour timeouts may be
changed to 4 hours. • Consult your dealer for more information.